Differences

This shows you the differences between two versions of the page.

--- software:pfsense [2018/01/01 21:07] – [pfsense ipv6 with comcast] superwizard
+++ software:pfsense [2018/01/02 20:32] – [pfsense ipv6 with comcast] superwizard
@@ Line 126: / Line 126: @@
 </code>
+</code>
+Comcast will let you request no more than a /60. 16 /64 subnets on a personal network should be
+more than enough for most people.
+Business class service may be able to request larger allocations, but consumer service can request
+anything from /64 to /60 only, depending on how many subnets you need (1 to 16, based on number of bits).
+Because of pfSense's IPv6 implementation with DHCPv6 on the WAN, there is no way to set up a static
+IPv6 address for your router on your LAN. You set up "Track Interface", "WAN", then select which subnet
+you want to use (which will only be 0 if you request a /64, could be 0-F if you request a /60). The LAN
+interface gets a SLAAC address based on the interface's MAC address.
+</code>
 ====== CONFIGURING DHCP SERVER AND DYNAMIC DNS SERVICES ======