====== CANable ======

From: https://github.com/colinoflynn/cantact-fw/tree/master/windows-driver

Also: http://canable.io/getting-started.html

Also: http://www.fischl.de/usbtin/

Also: https://github.com/normaldotcom/CANard/

<code>
Windows Driver
	Add signed drivers (NewAE Tech signature)
</code>



====== Proper Termination for NI-CAN Hardware (High Speed, Low Speed and Single Wire) ======


From: http://digital.ni.com/public.nsf/allkb/B5D65DF99543205486256FA500670B09

<code>
For High-Speed CAN, both ends of the pair of signal wires (CAN_H and CAN_L) must be terminated.
 This is because communication flows both ways on the CAN bus. 
</code>


====== Canbus ======

From: https://github.com/linklayer/cantact-hw

Also: https://wiki.linklayer.com/index.php/CANtact

<code>
The CANtact device is a single channel USB CAN interface. It can be used to connect to CAN bus 
systems, including cars, heavy duty vehicles, and industrial automation systems. CANtact works 
on Linux, OS X, and Windows.
</code>

From: https://www.tindie.com/products/protofusion/canable-usb-to-can-bus-adapter/

<code>
Second usb to canbus opensource
</code>