This is an old revision of the document!
Table of Contents
Maintenance
Ball Business - Don - 772.336.0092
+ HP Versions =
HP Color LaserJet 5550DN Printer
Reset Password
michaelmaurer Pimiento michaelmaurer May 31, 2014 at 8:49 PM 1ST POST I had the same problem. I was able to login with the following username:
supervisor
Note that it is all lowercase. Supervisor did not work.
Spice Reply
Password: <blank>
Dev. Unit - Development Unit
| =History |
Ricoh 3 Color Dev. Unit(TypeB) Unit New Replaced: 2016-08-15 Color Dev. Unit(TypeB) Unit error: 2016-06-05 Developent unit error: 2014-10-28 - Replaced from old ricoh 2014-11-4 Purchased Black Development Unit CDW 4/16/2014 Purchased Used Printer (Ricoh 3) 2015-11-23 Color Development units count - 29500 Moved Black Development unit to Purchased printer - 45000 on old machine (Ricoh 2) Reset Black Development count Ricoh 2 All Development Units have exceeded Life Span Ricoh 1 All Development Units have exceeded Life Span
| Replace Color PCU (Type A) |
If Replace Black Dev. Unit(TypeD) appears on the display
replace the black Development unit.
If Replace Color Dev. Unit(TypeB) appears on the display
replace the three color Development units.
If Replace Fusing Unit (Type C) appears on the display
replace the fusing unit.|
PCU Replacement - Photo Conductor Unit
| =History | Ricoh 3 |
Purchased Color PCU Provantage 2018-08-28 Installed 2018-11-11 Purchased Black PCU Amazon 2018-01-05 Purchased Color PCU CDW 2017-12-27 Purchased Black PCU CDW 2014-05-06 Purchased Used Printer 2015-11-23 Color PCU has 4400 count Moved Black PCU from other printer(Ricoh 2) - reset count - was 45000 on Ricoh 2 Ricoh 2 All PCU Exceeded Life Span Ricoh 1 All PCU Exceeded Life Span
| Replace Color PCU (Type A) |
If Replace Black PCU (Type F) appears on the display
replace the black photoconductor unit.
If Replace Color PCU (Type A) appears on the display
replace the three color photoconductor units.
If Replace Fusing Unit (Type C) appears on the display
replace the fusing unit.|
| =Name | =Consumables | =Average printable number of pages | =Part Number |
| Printer Maintenance Kit Type |
7200/7300 A |Color photoconductor unit × 3 Replace Color PCU (Type A)| 40,000 |402305
| Printer Maintenance Kit Type |
7200/7300 B |Color development unit × 3 Replace Color Dev. Unit(TypeB)| 80,000 |402306
| Printer Maintenance Kit Type |
7200/7300 C |Fusing unit × 1 | 80,000 |402307
| Printer Maintenance Kit Type |
7200/7300 D |Black development unit × 1 Replace Black Dev. Unit(TypeD)| 80,000 |402308
| Printer Maintenance Kit Type |
3800 E |Waste toner bottle × 1 | 40,000 |400662
| Printer Maintenance Kit Type |
7200/7300 F |Black photoconductor unit × 1 Replace Black PCU (Type F)| 40,000 |402310
| Printer Maintenance Kit Type |
3800 H |Paper feed roller × 3 | 150,000 |400576
| Cyan Color Print Cartridge |
Type 160 |*Cyan* | 10,000 |888445
| Magenta Color Print Cartridge |
Type 160 |*Magenta* | 10,000 |888444
Reset Counters for PCU and Dev Unit. Manually resetting the PM counter
Reset Counters
Go into SP MODE Method ONE
http://www.fixya.com/support/t240356-pcu_reset_procedure_needed
1. Hold the 'up' and 'down' arrows together for 5 seconds or longer.
2. Release the arrow keys and press the 'enter' key.
3. Select '2. Engine' - Then go to option '7.'
4. reset
5. Turn the machine off and on.
Go into SP MODE Method TWO
http://www.fixya.com/support/t1831084-replace_fuser_error_not_clearing
1. Hold the 'up' and 'down' arrows together for 5 seconds or longer.
2. Release the arrow keys and press the 'enter' key.
3. Select '2. Engine' - Then go to option '7.' - go to PM Counter Reset
Ricoh cl 7200/reset drum counters/color photoconductors
7804 [PM Counter Reset] (Unit, [Color]) Dev.: Development Unit, PF: Paper Feed Rollers, Transfer: Transfer Unit 7804 001 Paper 7804 002 PCU [K] 7804 003 PCU [Y] 7804 004 PCU [M] 7804 005 PCU [C] 7804 006 Dev. [K] 7804 007 Dev. [Y] 7804 008 Dev. [M] 7804 009 Dev. [C]
Replace-Color-PCU-alert-remains-on-Ricoh-CL
http://www.oasq.com/Replace-Color-PCU-alert-remains-on-Ricoh-CL-thread-363615-1-1.html
Go into SP MODE and reset the PCU counters at: 7-804-003 pcu yellow 7-804-004 pcu magenta 7-804-005 pcu cyan
7-804-xxx to reset the unit in question.
1 - PCU [K] 2 - PCU [Y] 3 - PCU [M] 4 - PCU [C] 5 - Dev. [K] 6 - Dev. [Y] 7 - Dev. [M] 8 - Dev. [C] 9 - Oil Supply 10 - PF By-pass 11 - PF Tray 1 12 - PF Tray 2 13 - PF Tray 3 14 - PF Tray 4 15 - Fusing 16 - Transfer 17 - Trans Cln 50 - All
Entering the Service Program Mode
http://www.copytechnet.com/forums/ricoh/48883-ricoh-aficio-cl7200-color-pcu.html
Entering the Service Program Mode - There are two ways to enter the Service Program Mode. Method 1: Turn the machine on while pressing the On Line key and Escape key together.
Method 2: Press the Up/Down arrow keys together for about 5 seconds, then press the Enter key.
1. Select '2. Engine' - Then go to option '7.'
After. do reset
7-804-xxx to reset count for the unit in question.
1 - PCU [K] 2 - PCU [Y] 3 - PCU [M] 4 - PCU [C] 5 - Dev. [K] 6 - Dev. [Y] 7 - Dev. [M] 8 - Dev. [C] 9 - Oil Supply 10 - PF By-pass 11 - PF Tray 1 12 - PF Tray 2 13 - PF Tray 3 14 - PF Tray 4 15 - Fusing 16 - Transfer 17 - Trans Cln 50 - All
Reference
http://download.kearnscorp.com/Service/Ricoh,%20Gestetner,%20Lanier/
Print Quality
Setup Print Quality \\Server3\programfiles\Drivers, Firmware and Manuals\Printers\Ricoh Aficio CL7200 CL7300\Print Quality
Manuals - Setup and Maintenance
\\ETSPG-SERVER1\Maintenance\ETS Computer System\Machine Configuration\Ricoh Aficio CL7200