User Tools

Site Tools


software:networkmonitor

Network Monitor

————————————————————————————————————————————————

Get Iperf

2024-02-01

iperf3: A TCP, UDP, and SCTP network bandwidth measurement tool Summary iperf is a tool for active measurements of the maximum achievable bandwidth on IP networks. It supports tuning of various parameters related to timing, protocols, and buffers. For each test it reports the measured throughput / bitrate, loss, and other parameters.

From <https://github.com/esnet/iperf>

• Windows: iperf3 binaries for Windows (built with Cygwin) can be found in a variety of locations, including https://files.budman.pw/ (discussion thread).

From <https://software.es.net/iperf/obtaining.html#binary-distributions>

https://files.budman.pw/

Test

Iperf3 -s : for server


Iperf3 -c 10.20.30.40 - f m -t 10
For ten seconds report Mbit/sec

iPerf speed test tool

From: https://iperf.fr/iperf-servers.php

Iperf is a widely used tool for network performance measurement and tuning. It is significant as a cross-platform tool that can produce standardized performance measurements for any network. Iperf has client and server functionality, and can create data streams to measure the throughput between the two ends in one or both directions. Typical Iperf output contains a time-stamped report of the amount of data transferred and the throughput measured.

NETWORK PERFORMANCE WITH JPERF/IPERF

2024-01-27

Free and openly available, Iperf is a command line tool useful for measuring network performance. In my last post, I introduced some basic command line instructions to run Iperf between two endpoints and showed how the tool can be used to generate and measure both TCP and UDP performance. This time, I’ll discuss Iperf’s graphical cousin: Jperf.

From <https://www.smallnetbuilder.com/lanwan/lanwan-howto/measuring-network-performance-jperf/>

http://ate-expert.com/digital-tests/how-to-measure-network-performance-with-jperfiperf.html

http://openmaniak.com/iperf.php

http://code.google.com/p/xjperf/

20 Best Free & Opensource Bandwidth Management Tools

From: http://www.how2shout.com/tools/best-free-opensource-bandwidth-management-tools.html

If you don’t want to go through the whole article then here is the list of tools.

    Solarwinds
    Wireshark
    BWM Tools: Bandwidth Management Tools
    Bandwidth Monitor
    NetWorx
    PacketFence
    Cacti
    ManageEngine NetFlow Analyzer
    BandwidthD
    Portty – Port Forwarding, Tunneling etc.
    MasterShaper
    PRTG Bandwidth Management
    Sarg
    Squid
    Internet Bandwidth Monitor(IBM)
    BitMeter OS
    NetBalancer
    Traffic Shaper XP

Ixia QCheck Free Network Check Software

Qcheck - Free Network Benchmark Utility

 http://www.ixchariot.com/products/datasheets/qcheck.html
 
 Qcheck, the network troubleshooting utility from Ixia, quickly checks network response time, throughput,
 and streaming performance. It even runs anywhere-to-anywhere traceroute!
 

Performance Endpoint for Linux (32-bit and 64-bit)

 endpoint 
 
 QChenck and IxChariot tests use endpoints (unobtrusive software agents) installed at the source
 and destination points of a test. An IxChariot traffic pair is the two endpoints needed for one traffic session
 Web: www.ixiacom.com
 The latest versions of the endpoints are always available for
 free at http://www.ixiacom.com/support/endpoint_library/
 
 
 removal:  /usr/local/Ixia/endpoint -k
software/networkmonitor.txt · Last modified: 2024/02/01 18:58 by superwizard