Differences

This shows you the differences between two versions of the page.

--- software:pfsense [2015/07/19 19:30] – superwizard
+++ software:pfsense [2018/01/06 04:12] (current) – superwizard
@@ Line 1: / Line 1: @@
+====== Scrape PFSense DHCP Leases Status Page and Export Results to JSON ======
+From: https://gist.github.com/pletch/037a4a01c95688fff65752379534455f
+<code>
+# This python (2.7) script provides a function to query the pfsense (v2.3) dhcp leases status page and
+store the results for # ip, hostname, and mac as lists. A second function is also provided to export
+the results in json to the file /tmp/dhcp_list.
+</code>
+====== Firewall Rule Basics ======
+From: https://doc.pfsense.org/index.php/Firewall_Rule_Basics
+<code>
+any - 0.0.0.0 to 255.255.255.255, or all IPv6 addresses
+Single host or alias - Select this and enter one IP address (1.2.3.4, aa:bb:cc:dd::1) or type the name of an Alias that has already been configured (Firewall > Aliases)
+Network - Select this and enter a network and mask (10.99.0.0/16, aa:bb:cc:dd::0/64)
+LAN net - The subnet configured on the LAN interface under Interfaces > LAN. On pfSense 2.2+, this also includes IP alias networks on that interface.
+LAN address - The IP address configured on the LAN interface under Interfaces > LAN
+zzz Net / zzz address - Works the same as LAN above but for other interfaces (WAN, OPT1, OPT2, etc.)
+PPTP clients - Automatically locate and use the addresses of PPTP clients
+L2TP clients - Automatically locate and use the addresses of L2TP clients
+This Firewall (self) - Any IP address assigned to any interface on this firewall (pfSense 2.2+)
+</code>
+====== Installing the Ubiquiti UniFi Controller Software on pfSense 2.2 ======
+From: http://www.robpeck.com/2015/03/installing-the-ubiquiti-unifi-controller-software-on-pfsense-2.2/#.VqPwMlLMa6E
+<code>
+Note: I am leaving this here for the reference and posterity, but for a variety of reasons,
+I no longer recommend doing this. It is a neat hack, but tends to be a bit of a pain to live
+with as you end up having to troubleshoot or reinstall it every time you update pfSense or
+Unifi. When you can install it on a Raspberry Pi for less than $50, there's really no need
+to do this.
+</code>
+====== Automatically backup Pfsense configuration files ======
+From: https://www.outsideopen.com/pfmb/
+<code>
+The script is secure and will only connect via SSH using SSH key authentication instead of passwords.
+We use pfMb on Mac and Linux but it should work on any *nix under bash.
+</code>
+From: https://knowledge.zomers.eu/pfsense/Pages/How-to-automate-pfSense-backup.aspx
+<code>
+It is very lightweight and easy to use this tool. It requires the Microsoft .NET framework 2.0 to be
+installed on the machine from which you are running it. Extract the executable in the ZIP and run it
+without parameters to see the help text which explains the options you have to run it:</code>
+From: https://doc.pfsense.org/index.php/Configuration_Backup_and_Restore
+<code>
+pfSense keeps its configuration in one convenient XML document. A backup of this document can be saved
+by going to Diagnostics > Backup/Restore, and clicking Download Configuration.
+Before downloading, review the options available such as only backing up certain areas, or excluding the
+RRD data from the backup file.
+Restoring a configuration is just as easy, click Browse, locate the backup configuration file, then click
+Restore Configuration
+</code>
+From: https://www.proteansec.com/linux/pfsense-automatically-backup-configuration-files/
+From: http://www.gremwell.com/node/397
+From:
+====== PFSENSE BEHIND A ROUTER ======
+From: http://hakology.co.uk/2014/02/pfsense-behind-a-router/
+<code>
+Trouble shooting:
+Can pfsense ping router – NO WAN config error
+Can pfsense ping pfsense client – NO – LAN config error / Client firewall
+Can pfsense client ping pfsense – NO – LAN config error / Client firewall
+Can pfsense ping 8.8.8.8 – NO – ASDL/CABLE router config error
+Can pfsense client ping router – NO – NAT error
+Can pfsense client ping 8.8.8.8 – NO – NAT error / ADSL / CABLE config error
+Can pfsense client ping 8.8.8.8 – YES – All good
+Can pfsense client load a website – NO – DNS Error – Check everything above is OK
+Can pfsense client load a website – YES – Everything is working
+</code>
+====== PFsense System Advanced Notification SMTP configuration ======
+From: https://forum.pfsense.org/index.php?topic=72015.0
+<code>
+Now - guess what ... Exchange does support plaintext-logins when configured correctly,
+but only using the method "LOGIN" ...
+Re: Cannot send mails using office365 smtp server
+« Reply #14 on: November 22, 2014, 10:05:07 pm »
+Got it working! Issue was STARTTLS (and save before Test).
+Thanks!
+</code>
+{{ :software:pfsensenotificationconfigurationforoffice365-2015-08-29_14_29_41-system_advanced_notifications.png?300 |Office365 Configuration}}
+<code>
+Office365 SMTP Configuration for PFsense to relay mail to notification e-mail address. Note for testing always reenter the password.
+</code>
 ====== pfsense ipv6 with comcast ======
+From: http://undergroundmod.com/2016/08/25/pfsense-ipv6-with-comcast/
 From: https://r.wundrd.net/article/pfsense-ipv6-comcast/
+[[systems:ipv6#pfsense ipv6 with comcast]]
 <code>
@@ Line 12: / Line 137: @@
 </code>
+From: https://forum.pfsense.org/index.php?topic=83576.0
+<code>
+Comcast will let you request no more than a /60. 16 /64 subnets on a personal network should be
+more than enough for most people.
+Business class service may be able to request larger allocations, but consumer service can request
+anything from /64 to /60 only, depending on how many subnets you need (1 to 16, based on number of bits).
+Because of pfSense's IPv6 implementation with DHCPv6 on the WAN, there is no way to set up a static
+IPv6 address for your router on your LAN. You set up "Track Interface", "WAN", then select which subnet
+you want to use (which will only be 0 if you request a /64, could be 0-F if you request a /60). The LAN
+interface gets a SLAAC address based on the interface's MAC address.
+</code>
+{{ :software:2018-01-02_15_33_50-_diagnostics_edit_file.png?direct&600 |}}
+{{ :software:2018-01-02_15_36_37-_interfaces_wan.png?direct&600 |}}
+{{ :software:2018-01-02_15_38_34-_interfaces_lan-general.png?direct&600 |}}
+{{ :software:2018-01-02_15_39_25-_interfaces_lan-track.png?direct&600 |}}
+{{ :software:2018-01-02_15_43_02-_services_dhcpv6_server_ra_lan_dhcpv6_server.png?direct&600 |}}
 ====== CONFIGURING DHCP SERVER AND DYNAMIC DNS SERVICES ======
@@ Line 113: / Line 263: @@
 http://www.onlineconversion.com/unix_time.htm
 ====== Squid Configuration ======
 === Cache management page ===