Differences

This shows you the differences between two versions of the page.

--- software:pfsense [2016/01/24 21:57] – [Squid Configuration] superwizard
+++ software:pfsense [2018/01/06 04:12] (current) – superwizard
@@ Line 1: / Line 1: @@
+====== Scrape PFSense DHCP Leases Status Page and Export Results to JSON ======
+From: https://gist.github.com/pletch/037a4a01c95688fff65752379534455f
+<code>
+# This python (2.7) script provides a function to query the pfsense (v2.3) dhcp leases status page and
+store the results for # ip, hostname, and mac as lists. A second function is also provided to export
+the results in json to the file /tmp/dhcp_list.
+</code>
+====== Firewall Rule Basics ======
+From: https://doc.pfsense.org/index.php/Firewall_Rule_Basics
+<code>
+any - 0.0.0.0 to 255.255.255.255, or all IPv6 addresses
+Single host or alias - Select this and enter one IP address (1.2.3.4, aa:bb:cc:dd::1) or type the name of an Alias that has already been configured (Firewall > Aliases)
+Network - Select this and enter a network and mask (10.99.0.0/16, aa:bb:cc:dd::0/64)
+LAN net - The subnet configured on the LAN interface under Interfaces > LAN. On pfSense 2.2+, this also includes IP alias networks on that interface.
+LAN address - The IP address configured on the LAN interface under Interfaces > LAN
+zzz Net / zzz address - Works the same as LAN above but for other interfaces (WAN, OPT1, OPT2, etc.)
+PPTP clients - Automatically locate and use the addresses of PPTP clients
+L2TP clients - Automatically locate and use the addresses of L2TP clients
+This Firewall (self) - Any IP address assigned to any interface on this firewall (pfSense 2.2+)
+</code>
 ====== Installing the Ubiquiti UniFi Controller Software on pfSense 2.2 ======
@@ Line 86: / Line 121: @@
 ====== pfsense ipv6 with comcast ======
+From: http://undergroundmod.com/2016/08/25/pfsense-ipv6-with-comcast/
 From: https://r.wundrd.net/article/pfsense-ipv6-comcast/
@@ Line 100: / Line 137: @@
 </code>
+From: https://forum.pfsense.org/index.php?topic=83576.0
+<code>
+Comcast will let you request no more than a /60. 16 /64 subnets on a personal network should be
+more than enough for most people.
+Business class service may be able to request larger allocations, but consumer service can request
+anything from /64 to /60 only, depending on how many subnets you need (1 to 16, based on number of bits).
+Because of pfSense's IPv6 implementation with DHCPv6 on the WAN, there is no way to set up a static
+IPv6 address for your router on your LAN. You set up "Track Interface", "WAN", then select which subnet
+you want to use (which will only be 0 if you request a /64, could be 0-F if you request a /60). The LAN
+interface gets a SLAAC address based on the interface's MAC address.
+</code>
+{{ :software:2018-01-02_15_33_50-_diagnostics_edit_file.png?direct&600 |}}
+{{ :software:2018-01-02_15_36_37-_interfaces_wan.png?direct&600 |}}
+{{ :software:2018-01-02_15_38_34-_interfaces_lan-general.png?direct&600 |}}
+{{ :software:2018-01-02_15_39_25-_interfaces_lan-track.png?direct&600 |}}
+{{ :software:2018-01-02_15_43_02-_services_dhcpv6_server_ra_lan_dhcpv6_server.png?direct&600 |}}
 ====== CONFIGURING DHCP SERVER AND DYNAMIC DNS SERVICES ======
@@ Line 201: / Line 263: @@
 http://www.onlineconversion.com/unix_time.htm
 ====== Squid Configuration ======
-Note: squid not starting: I think cashe: /var/squid/cashe is not correct location
 === Cache management page ===