Differences

This shows you the differences between two versions of the page.

--- software:canbus [2017/11/07 20:39] – created superwizard
+++ software:canbus [2017/11/28 04:40] (current) – [CANable] superwizard
@@ Line 1: / Line 1: @@
+====== CANable ======
+From: https://github.com/colinoflynn/cantact-fw/tree/master/windows-driver
+Also: http://canable.io/getting-started.html
+Also: http://www.fischl.de/usbtin/
+Also: https://github.com/normaldotcom/CANard/
+<code>
+Windows Driver
+	Add signed drivers (NewAE Tech signature)
+</code>
+====== Proper Termination for NI-CAN Hardware (High Speed, Low Speed and Single Wire) ======
+From: http://digital.ni.com/public.nsf/allkb/B5D65DF99543205486256FA500670B09
+<code>
+For High-Speed CAN, both ends of the pair of signal wires (CAN_H and CAN_L) must be terminated.
+ This is because communication flows both ways on the CAN bus.
+</code>
 ====== Canbus ======
@@ Line 9: / Line 37: @@
 systems, including cars, heavy duty vehicles, and industrial automation systems. CANtact works
 on Linux, OS X, and Windows.
+</code>
+From: https://www.tindie.com/products/protofusion/canable-usb-to-can-bus-adapter/
+<code>
+Second usb to canbus opensource
 </code>