Differences

This shows you the differences between two versions of the page.

--- systems:hp [2013/01/08 19:37] – [Printers] superwizard
+++ systems:hp [2020/10/16 16:48] (current) – [WMIC] superwizard
@@ Line 1: / Line 1: @@
+====== Hewlett Packard HPE Integrity ======
+From: https://www.islandco.com/hp-integrity-server/rx2800-i4-server
+Also: https://community.spiceworks.com/topic/2017842-emc-nas-vs-windows-file-storage
+<code>
+Very reliable central server
+</code>
+====== 8710 wireless is disabled ======
+From: https://h30434.www3.hp.com/t5/HP-Connected-Mobile-Printing-and-Cloud-Printing/8710-wireless-is-disabled/td-p/5734513
+Re: 8710 wireless is disabled
+Options
+‎09-16-2016 01:49 PM
+I'm not sure why they don't document it but very faintly you can see a curved arrow to the bottom left of the LCD panel (in line where you might see the House or Question Mark icon).  If you tap this roughly 4 times, eventually you will be brought to a support Menu.  Within this menu you'll see left to right arrows and various options to either Reste to Factory Defaults or Enable/Disable Menus.  This helped me for when the intial setup was donw with Network disabled.
+====== HP Designjet T610 Printer Series - Color management ======
+From: https://support.hp.com/lt-en/product/hp-designjet-t610-printer-series/3339415/document/c01095524
+<code>
+HP Designjet T610 printers have been engineered with advanced hardware and software features to ensure predictable and dependable results.
+Color calibration for consistent colors.
+One gray and two black inks provide neutral grays on all paper types.
+The Photo Black ink provides pure blacks when printing on photo papers.
+Color emulation of other HP Designjet printers.
+</code>
+====== HP Serial number ======
+From: Support
+<code>
+wmic bios get serialnumber
+</code>
+====== WMIC ======
+-10-16
+<WRAP center round box >
+Windows Management Instrumentation Command-line (WMIC), which uses the power of Windows Management Instrumentation (WMI) to enable systems management from the command line, is one of those reasons.
+From <https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-2000-server/bb742610(v=technet.10)?redirectedfrom=MSDN>
+What service packs, patches and hotfixes were installed and on what date?
+    wmic qfe get description,installedOn /format:csv
+From <https://ttcshelbyville.wordpress.com/2019/10/20/wmic-a-little-known-command-in-windows-2/>
+</WRAP>
+====== BIOS and startup Options ======
+From: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/hp-envy-700-027c-desktop-windows-8-cant-get-in-bios/td-p/2892979
+    Hitting esc during boot - will bring up a boot menu. If it doesn't you are not tapping it soon enough.
+    (F10 will bring up Setup or BIOS) (F11 will launch the recovery manager from the recovery partition)
+====== HP LaserJet 5Si, 8000, 8100, 8150: Maintenance Kit Instructions ======
+From: http://www.lbrty.com/tech/articles/wx/wx_mkit.html
+Also: http://www.printertechs.com/maintenancekit-instructions/hp-laserjet-8000/265-hp-laserjet-8000-reset-maintenance-count
+<code>
+In some cases (especially if the maintenance kit is installed prematurely – before the
+“Perform User Maintenance” message comes up), step 1 may not work. In these cases, you
+will have to go into service mode and directly manipulate the maintenance count:
+Turn the printer off. Then press and hold Select and Cancel Job while powering on.
+Continue to hold these keys until all display lights are on, then release them.
+Press and release the right side of Menu, then Select. The display will briefly show
+“Service Mode” and return to this after initializing.
+Go into the Service Menu and set “Maintenance Count” to zero, one digit at a time
+(Value changes the underlined digit;
+Select sets that digit and moves to the next one – make sure to select all digits).
+When finished, press Go twice to exit the service mode.
+Caution: Do not change the “Maintenance Interval” – in particular,
+do not set it to zero!
+This can cause a permanent “49” error and necessitate replacement of the formatter board.
+Print a configuration page. One of two things will happen:
+“Pages Since Last Maintenance” will have gone to zero
+(in this case, no further action is required);
+“Perform User Maintenance” will come up on the display.
+In this case, go back and perform step 1, which will now work.
+</code>
+====== HP Printer Diagrams and Parts ======
+http://www.laserpros.com/partdiagrams.asp
+Laser Pros International, (LPI), was formed in 1990 by company president Steve Spencer. Steve had been working at Prototype Design, a company that made one part, a fuser roller, for the original LaserJet printer. It was there that he first conceived Laser Pros International, a company that would quickly grow to one of the world's largest suppliers of laser printer parts and accessories, something for which there was a growing demand.
 ====== Printers ======
@@ Line 5: / Line 111: @@
 Sets up email address for printing to printer.
+====== Hp scan and capture App ======
-===== Hp scan and capture App =====
 http://apps.microsoft.com/windows/en-US/app/hp-scan-and-capture/94fffdd0-bb3b-4adc-96ca-24c1d79e16c6
+====== Specifications ======
+From: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01911652&tmp_track_link=ot_faqs/top_issues/en_us/c01911652/loc:4&cc=us&dlc=en&lang=en&lc=en&product=4066341
+    HP Pavilion Elite e9210t Desktop PC Product Specifications and Configurable Options
@@ Line 14: / Line 125: @@
 http://h30434.www3.hp.com/t5/TouchSmart-PC/Replacing-keyboard-and-mouse/m-p/115045#M1828
+====== Removal of Software HP Machines ======
+HP Games