Differences

This shows you the differences between two versions of the page.

--- systems:voip [2013/03/15 17:35] – superwizard
+++ systems:voip [2013/03/24 01:09] (current) – [why is the audio/video quality poor in one direction] superwizard
@@ Line 1: / Line 1: @@
+====== Setup Ringcentral Sip Phone usint X-Lite ======
+| RingCentral   | X-Lite | Setting |
+| Sip Domain  | Domain | sip.ringcentral.com:5060 |
+| Outbound Proxy  | Proxy | sip10.ringcentral.com:5090 |
+| User Name | Userid | |
+| User Name | Display Name | |
+| Password | Password |
+| Authorization ID | Authorization name |
+====== Recognizing and Categorizing Symptoms of Voice Quality Problems ======
+From: http://www.cisco.com/en/US/tech/tk652/tk698/technologies_white_paper09186a00801545e4.shtml
+    Introduction
+    High Level Troubleshooting Procedure
+    Categorize and Define the Symptoms
+    Sample Sound Recordings
+    Noise
+    Voice Distortion
+       Echoed Voice
+       Garbled Voice
+       Volume Distortion
+    Common Problems Hearing Sound Files
+    Cisco Support Community - Featured Conversations
+    Related Information
 ====== why is the audio/video quality poor in one direction ======
@@ Line 15: / Line 43: @@
 From: http://social.technet.microsoft.com/Forums/en-US/winserverPN/thread/35f79821-7ab5-4335-89d5-cec58fa31d33/
-  If you want to monitor the amount of UDP packet loss you are experiencing I would use the performance logs and alerts utility.  The counter I believe you would be interested in is under the UDP performance object, counter being "Datagrams Received Errors".  Also, you can query any of these counters via WMI.
+  If you want to monitor the amount of UDP packet loss you are experiencing I would use the performance logs and alerts utility.  The counter I
+  believe you would be interested in is under the UDP performance object, counter being "Datagrams Received Errors".  Also, you can query any
+  of these counters via WMI.
+====== Testing Soak Testing ======
+From: http://www.loadtest.com.au/types_of_tests/soak_tests.htm
+Network testing
+    Soak testing is running a system at high levels of load for prolonged periods of time.
+    A soak test would normally execute several times more transactions in an entire day (or night)
+    than would be expected in a busy day, to identify any performance problems that appear after a
+    large number of transactions have been executed.
+====== Packet Loss Testing ======
+From: http://packetloss.sourceforge.net/
+    Packetloss is a set of programs to detect packet losses in UDP and TCP between two hosts. It does
+    this by sending a continuous stream of packets, and detects any delay or loss in the streams. It is useful to measure the impact of failover tests
+====== Detecting IP Packet Loss for UberNerds ======
+From: http://www.onsip.com/blog/2007/10/25/detecting-ip-packet-loss-ubernerds
+   Now you might think someone would have a hard time hearing a 1/50 second gap in a 3 minute conversation.
+   And you would be right. But if there is an IP network in the middle of the conversation, it turns out that
+   drop detection depends greatly on the the piece of IP phone hardware/software one is talking on. In this case,
+   the Polycom IP phone on my desk was useless as an empirical tool in helping me track down the 0.05% packet loss
+   in question - I simply could not hear it. However, the Grandstream GXP-2000 (version 1.1.0.14) we have in our
+   test bed turned out to be an invaluable tool since it has the uncanny ability to turn the 1/50 second gap caused
+   by a single lost packet into a multi-second garbled mess. So, if like me, you enjoy testing for dropped packets,
+   I highly recommend adding the Grandstream to your toolbox - it is a great tool and worth far more than the retail price.