Marcus Hall

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== x-lite SIP Phone ======


http://www.cafesip.org/projects/jiplet/xlite-settings/x-lite-settings.html


How to set port forwarding?
First, you will need to set port forwarding at the router located between the global network and your local network to forward packets with specific destination port numbers to the Brekeke SIP Server. 

The ports you need to forward are as follows (you will find these values on the Brekeke SIP Server configuration page):
When Brekeke PBX/Brekeke SIP Server is behind a NAT router, the following configuration is required:

Port Forwarding information at the router
SIP exchanger -- Local Port [UDP] Default value: 5060
RTP exchanger -- From Minimum Port to Maximum Port [UDP] Default value: 10000-10999 
Interface address field on Brekeke SIP Server
Brekeke SIP Server Admintool > [Configuration] > [System] > [Network]>[Interface Address] = Your router's global IP Address



http://wiki.brekeke.com/wiki/Set-port-forwarding